How To Factory Reset Windows 7 Hp

Z7_3054ICK0KGTE30AQO5O3KA30N0

hp-concentra-wrapper-portlet

Actions

HP PCs - Performing an HP System Recovery (Windows seven)

This certificate is for HP and Compaq computers that came with Windows 7 installed.

This certificate explains how to reset the computer to its original factory shipped country and is divided into sections based on the different means of performing a arrangement recovery.

Back up all personal files and read all caution statements before performing a system recovery.

The complete recovery procedure can take 4 to 6 hours or more than to complete. For best results, the figurer should be connected to the Internet. The computer restarts several times during the process. Do not plow off the power or interrupt the recovery process until the prompt to log in to Windows displays.

Types of system recovery

Your estimator might accept three types of System Recovery available, or it might take only 2. Use the recovery type that resolves your outcome without making more changes than necessary.

System Recovery: This pick reformats the organization drive (usually C:), reinstalls the original operating system, and reinstalls all the original hardware drivers and software. Organisation Recovery does non affect user created partitions. If there are 2 hard drives, System Recovery modifies but the drive with the operating organization.

caution:
If the size of the operating system segmentation (usually C:) was reduced beneath a minimum size requirement, other user created partitions are removed and stored data is destroyed.
Manufactory Reset: Factory Reset removes all partitions, reformats the entire hard drive, reinstalls the original operating organization, and reinstalls all the original hardware drivers and software. This pick also recreates the required Recovery partition (usually D:) and UEFI sectionalization (unremarkably E:) and reinstalls the required software.

The Mill Reset option returns all of the notebook'due south software to the condition it was in at the fourth dimension of purchase. All user changes or additions are removed.
Minimized Epitome Recovery: Available on many of HP's notebook computers, the Minimized Image Recovery removes all partitions, reformats the entire hard bulldoze, reinstalls the original operating organisation and hardware drivers, and reinstalls HP essential software (such as HP Support Assistant and HP Recovery Manager). Minimized Epitome Recovery does not reinstall the trial applications and games.

Recovery from the Windows vii desktop screen

If Windows seven opens correctly, perform the post-obit steps to start a system recovery from the Windows 7 start menu.

Turn off the figurer.
Disconnect all peripheral devices, except for the monitor, keyboard, mouse, and power cord. Remove media from internal drives, and remove any recently added internal hardware.
Turn on the estimator.
Click Start , click All Programs, click Recovery Director, and then click Recovery Manager once more.

If you are prompted for an Administrator password or confirmation, type the countersign or provide confirmation. If a User Account Command window asks if you desire to allow the plan to make changes to the computer, click Yes.
Nether I need assistance immediately, click Organization Recovery.
The Recovery Manager asks if you desire to restore the computer to its original manufactory shipped condition. Click Yes, and so click Next.
The computer restarts. If the recovery partition on the hard disk drive drive is functioning correctly, the Recovery Manager window displays.

note:
If the recovery partition on the hd bulldoze is not functioning correctly, a fix of recovery discs is needed to run a organisation recovery. Follow the instructions listed in the section Recovery from recovery discs.
Click System Recovery.
When System Recovery prompts y'all to support your files, select a backup choice:
- If you have already backed up personal files or you practice not want to back upwardly personal files, select Recover without backing upward your files, and and so click Next. Continue to the side by side step.
- If you want to back up your personal files, follow these steps to create a backup.
  Select Back up your files first (recommended), then click Adjacent.
  
  Select the file types to support, so click Next.
  
  Recovery Manager scans the calculator for storage devices. Select the storage device to salve the fill-in, and and then click Next.
  
  annotation:
  If you lot selected a CD or DVD drive, the computer prompts you to insert a blank disc.
  
  When Recovery Manager is finished backing up files, remove the fill-in disc or storage device, then click Adjacent to continue with the recovery process.
  
  annotation:
  If the backup process fails, brand sure the capacity of the storage device is large enough to shop the files, or endeavor de-selecting some file types to reduce the corporeality of files that are copied. Other reasons for failed backups might exist caused by file corruption. In some cases, information technology might non exist possible to save files using this backup method.
Click OK in the warning that displays.
After the system recovery is consummate, click Terminate to restart the computer. Consummate the setup screens and wait until the computer finishes the setup.
Once the setup is consummate, turn off the computer, reconnect all devices and cables, and then turn on the figurer.
Before using the reckoner, update and protect your computer. Reinstall whatever virus and security software that was installed before the system recovery.
Reinstall any software programs that were added after purchasing the computer, also as whatever files that were backed upward.

Recovery from the startup screen (during system kick) OR when unable to boot to login in screen

If Windows 7 does not open up correctly, perform the following steps to recover the computer:

notation:
If the recovery partition on the hard disk is not functioning correctly, this method does not work and an error bulletin displays. If an error message indicates that System Recovery cannot be run from the startup screen, a ready of recovery discs is needed to perform a system recovery. Follow the instructions listed in the section Recovery from recovery discs.

Plow off the computer.
Disconnect all peripheral devices, except for the monitor, keyboard, mouse, and power cord. Remove media from internal drives, and remove any recently added internal hardware.
Plow on the computer and repeatedly press the F11 key, nearly once every second, until Recovery Manager opens.
Under I demand help immediately, click System Recovery.
When System Recovery prompts you lot to support your files, select a fill-in option:
- If yous have already backed up personal files or you do not want to back up personal files, select Recover without backing upwardly your files, and then click Next. Continue to the next stride.
- If yous want to support your personal files, follow these steps to create a backup.
  Select Back upwards your files first (recommended), and then click Adjacent.
  
  Select the file types to support, and then click Next.
  
  Recovery Manager scans the calculator for storage devices. Select the storage device to relieve the fill-in, and then click Next.
  
  note:
  If you selected a CD or DVD drive, the computer prompts you to insert a bare disc.
  
  When Recovery Manager is finished backing up files, remove the backup disc or storage device, and and so click Next to go on with the recovery process.
  
  note:
  If the backup process fails, make sure the capacity of the storage device is big enough to store the files, or try de-selecting some file types to reduce the amount of files that are copied. Other reasons for failed backups might exist caused by file abuse. In some cases, information technology might non exist possible to save files using this fill-in method.
Click OK in the warning that displays.
After the arrangement recovery is complete, click Finish to restart the calculator. Complete the setup screens and look until the computer finishes the setup.
In one case the setup is complete, turn off the computer, reconnect all devices and cables, and and then turn on the computer.
Before using the reckoner, update and protect your computer. Reinstall any virus and security software that was installed before the system recovery.
Reinstall any software programs that were added after purchasing the reckoner, as well as whatever files that were backed upward.

Recovery from recovery discs

Perform the following steps to recover the reckoner using a set of recovery discs (either CDs or DVDs). These discs can be a set that was received from HP Support or discs that you created.

annotation:
HP does not include recovery discs in the box its personal computers as the recovery software comes on the hard drive. You can obtain recovery discs from HP Support, or use Recovery Managing director software to create a set of recovery discs yourself. HP recommends creating a set of recovery discs when yous receive your calculator and storing them in a safe place. Support Sent Recovery Discs tin take as long equally 4 to 6 hours to complete system recovery, but recovery discs that yous create often take less time to complete system recovery. For more data about creating a fix of recovery discs, run across Creating Recovery Discs or Saving a Recovery Paradigm to a USB Flash Bulldoze in Windows vii.

Plow on the estimator, then insert the first recovery disc into the bulldoze.
Press and hold the power button to plow off the computer.
Disconnect all peripheral devices, except for the monitor, keyboard, mouse, and ability cord. Remove media from internal drives, and then remove any recently added internal hardware.
Turn on the computer.
Immediately press the Escape fundamental repeatedly, nigh once every second, until a Startup Carte du jour or Select boot device menu opens.
The selections yous need to make vary slightly depending on the type of menu that displays on your screen:
- If a Select Kicking Device menu displays, use the up or down arrow key to select the CD/DVD drive, and then press Enter to go along.
- If a Startup Menu opens, press F9 to open up "Kicking Carte du jour" or "Boot Device Options". Use the upwardly or downwards arrow key to select the CD/DVD drive. Then press Enter.
  
  note:
  More one CD/DVD drive pick might be available from the list of bootable devices. If so, select one of the CD/DVD selections from the listing to see if HP Recovery starts. If recovery does non start or a not-system disk error displays, restart the computer by pressing the power button and so repeat these steps to select another CD/DVD drive. When recovery starts, continue using the steps to complete recovery.
A window might display and prompt you to choose whether to run Recovery Manager from the hard disk drive or from the disc inserted. If this window displays, select the Run program from disc, then click Next.
Select an option based on the type of recovery discs you have:
- Recovery discs created from your computer:
  
  Click Factory Reset under I need help immediately. If the side by side screen prompts yous to confirm your choice, select Yes so click Next. If no confirmation screen displays, keep with the side by side step.
- Recovery discs received from HP support:
  
  Select one of the following selections, depending on which option is shown on your screen, and then click Next.
  - Manufacturing plant Reset - Reset the computer by erasing the entire drive and restoring to the factory setup
  - Reset the computer by erasing the unabridged drive and restoring to the mill setup
When Arrangement Recovery prompts you to back upward your files, select a backup option:
- If you have already backed up personal files or you do not want to back up personal files, select Recover without bankroll up your files, and then click Next. Continue to the next step.
- If you lot want to back upwards your personal files, follow these steps to create a backup.
  Select Back up your files first (recommended), and and so click Side by side.
  
  Select the file types to back up, and so click Next.
  
  Recovery Manager scans the computer for storage devices. Select the storage device to salvage the backup, then click Next.
  
  note:
  If you selected a CD or DVD drive, the computer prompts you to insert a blank disc.
  
  When Recovery Manager is finished backing up files, remove the fill-in disc or storage device, and then click Adjacent to continue with the recovery process.
  
  note:
  If the backup process fails, brand sure the capacity of the storage device is big enough to store the files, or try de-selecting some file types to reduce the corporeality of files that are copied. Other reasons for failed backups might exist caused by file abuse. In some cases, it might non be possible to save files using this backup method.
Click OK in the alarm that displays.
Read and respond to the screens as they display. If a screen prompts for a disc, insert the next disc. In some cases, you might have to repeatedly insert the same disc several times before the screen allows you to go on.
Subsequently organization recovery is consummate, remove the disc. If the tray does non eject the disc, press the eject button on the PC example to squirt the disc.
If you are presented with a "Restoration consummate" screen, click Terminate.

If you are presented with a "File re-create is complete" screen, click Next.
Depending on which model of reckoner you take, the computer either turns off or restarts. If the computer shuts off, wait 5 seconds and turn on the computer.

note:
If y'all are using Back up Sent Recovery discs sent from HP, it tin can have more than than an hour to complete the recovery procedure. Do not interrupt the recovery procedure. The recovery procedure is complete when the Windows Setup screens appear.
Complete Windows setup when the screens announced.
Once Windows setup has been completed, plow off the computer, reconnect all devices and cables, and then plow on the computer.
Earlier using the estimator, update and protect your computer. Reinstall any virus and security software that was installed earlier the system recovery.
Reinstall whatsoever software programs that were added later purchasing the computer, as well equally whatsoever files that were backed up.

Kick from USB recovery drive

Perform the following steps to recover the computer using a USB wink drive.

Turn on the computer, and insert the USB flash drive into a USB port.
Turn off the reckoner by pressing and holding the power push button.
Disconnect all peripheral devices, except for the monitor, keyboard, mouse, and power cord. Remove media from internal drives, and remove any recently added internal hardware.
Immediately press the Escape central repeatedly, about once every second, until a Startup or Select Boot Device Bill of fare opens.
The selections you demand to brand vary slightly depending on the type of menu that displays on your screen:
- If a "Select Kick Device" menu displays, use the upward or down arrow key to select your USB Storage Device, and printing Enter to proceed.
- If a "Startup Bill of fare" opens, press F9 to open the "Kick Menu" or "Boot Device Options". Use the upward or down arrow key to select the name of your USB Storage Device (the book label of the drive). Then printing Enter to continue.
A window might display and prompt you to cull whether to run Recovery Manager from the hard deejay or from the media inserted. If this window displays, select the USB flash drive option, and and then click Adjacent.
Click System Recovery under I need help immediately. On the next screen, select Yeah to confirm that you want to restore your computer to its original factory condition, and so click Next to continue.
When Organization Recovery prompts you to back up your files, select a backup option:
- If you accept already backed upwards personal files or yous exercise not want to back upward personal files, select Recover without bankroll up your files, and and then click Adjacent. Proceed to the adjacent step.
- If you want to back upwards your personal files, follow these steps to create a backup.
  Select Back up your files showtime (recommended), then click Adjacent.
  
  Select the file types to back upwards, and then click Adjacent.
  
  Recovery Manager scans the computer for storage devices. Select the storage device to save the backup, and then click Adjacent.
  
  When Recovery Manager is finished bankroll up files, remove the backup disc or storage device, and then click Next to continue with the recovery process.
  
  note:
  If the backup procedure fails, make sure the chapters of the storage device is large plenty to store the files, or try de-selecting some file types to reduce the amount of files that are copied. Other reasons for failed backups might exist caused by file abuse. In some cases, it might not exist possible to save files using this backup method.
Click Next. A message displays warning you that all devices should exist asunder from the PC. Be sure all devices, except the recovery wink drive, are asunder, and and then click OK.
Read and reply to the screens as they appear. After arrangement recovery is complete, a "Restoration complete" screen displays.
Remove the USB flash drive from the USB port.
Click Finish to restart your computer.
Depending on the model of your computer, the figurer either turns off or restarts. If the calculator turns off, await 5 seconds, and and so turn on the computer.
Complete Windows setup when the screens appear.
Once Windows setup has been completed, plow off the figurer, reconnect all devices and cables, and then turn on the estimator.
Before using the computer, update and protect your computer. Reinstall any virus and security software that was installed earlier the system recovery.
Reinstall any software programs that were added after purchasing the computer, besides as any files that were backed upward.